Best Way To Germinate Auto Weed Seeds


Buy Cannabis Seeds Online

If you're looking for ways to germinate your autoflowering cannabis seeds quickly, here are 5 EASY METHODS used by professional growers. Growing your own autoflowering cannabis is easy, cost-efficient, and produces fast results. As you can see, sprouting autoflowering seeds is easy and produces rapid results. The most known methods to sprout your seeds and get your grow cycle going in no time.

Best Way To Germinate Auto Weed Seeds

5 Easy Ways to Germinate Autoflower Seeds Quickly!

Table of content

Are you looking for ways to germinate autoflower seeds quickly? If so, you’re in luck! In this blog post, we’ll share five easy ways to do just that.

How to Germinate Autoflower Seeds Quickly!

If you’re looking to germinate your autoflower seeds quickly and easily, there are a few simple steps you can take.

The first step is to soak the seeds in water for at least 12 hours. This will help to soften them and increase their chances of germination.

Once the seeds have been soaked, you can start the germination process by placing them in a warm, moist environment. You can either place them in a pot of water or soil, or you can put them in a warm oven.

Be sure to keep an eye on your seeds and water them as needed. Once they’ve germinated, you can transplant them into soil or a pot.

The Best Way to Germinate Autoflower Seeds

There are a few ways to germinate autoflower seeds quickly. The most common way is to soak the seeds in water overnight, then drain and place them in a warm, moist environment. additionally, you can also place the seeds in a wet and warm, sunny spot.

The Worst Way to Germinate Autoflower Seeds

There are a few ways to go about germinating autoflower seeds, but all of them have their own disadvantages. The most common way is to put the seeds in moist soil and leave them there for several weeks, though this can be time-consuming and unpredictable. Another option is to warm the soil up before planting the seeds, but this also has its risks. Finally, you can try to germinate the seeds by exposing them to direct sunlight or warmth, but this method is often unsuccessful.

5 Easy Ways to Germinate Autoflower Seeds Quickly!

There are a few quick and easy ways to germinate autoflower seeds. The following options can help you get your plants up and growing in no time!

Option 1: Soak the Seeds in Water for 24 Hours If you have soaked the seeds overnight, simply give them a quick rinse before placing them into water again. The soaking process will help to soften the seed coat, which makes it easier for them to absorb water and begin germination.

Option 2: Place Them on a Warm Plate or in Warm Water Some growers find that heat speeds up the germination process. You can place the seeds on a warm plate or soak them in warm water for a couple of hours. Just be careful not to overheat. The warmth will also help set the seed embryo into action.

Option 3: Rinse Them with Coldwater for 30 Seconds Once They Germinate After soaking or Placing on Warmer Temperature Simply rinsing the seeds with cold water after they germinate will stop any seed splitting that may occur and ensure that all of the embryos are activated. This is an easy way to speed up your crops growth if you don’t have much time available!

Do you germinate autoflower seeds in the dark?

There are many ways to germinate autoflower seeds, but some people prefer to do so in the dark. This is because some light can inhibit the growth of the plants. If you want to germinate your autoflower seeds in the dark, you can use a black light or a fluorescent light.

How long does it take for an autoflower seed to germinate?

What is the ideal germination temperature for autoflower seeds?

There is no one definitive answer to this question, as the time it takes for autoflower seeds to germinate will vary depending on a variety of factors including the type of autoflower seed, soil temperature and humidity, and light exposure. However, most experts recommend germinating autoflower seeds in a warm, moist environment between 68-77 degrees Fahrenheit.

What is the ideal media for autoflower seed germination?

How long does it take a autoflower seed to germinate?

The ideal media for autoflower seed germination is a moist, well-aerated mix with good drainage. Some growers swear by perlite, sand or vermiculite; others prefer soil. Be sure to add enough compost or fertilizers to make up for the lack of organic matter in the potting medium. Seeds should be spaced about 1″ apart when growing cannabis seeds indoors.

What are the best methods for germinating autoflower seeds?

When it comes to germinating autoflower seeds, there are a few different methods that people use. The two main ways are by using light or by using heat. Some people even try to germinate their seeds in the dark, but this is not always successful. Here are some tips on how to germinate autoflower seeds successfully:

Start with fresh autoflower seeds. Older ones will not germinate as quickly and may even end up being unproductive.

Fill a container halfway with warm water and add the desired amount of your autoflower seed mix. Soak for 12 hours, then drain and place the seedlings into a fresh pot of water. Add more water as needed.

Place the pot in a sunny area and allow the seeds to soak up as much sunlight as possible. Do not cover them with plastic or they will get too hot and may not germinate.

Once you see germination taking place, gradually move the pot into darker areas of the garden and water regularly. When the plants have grown several inches high, they are ready to be transplanted into soil or Peters seed starting mix.

Be patient – germination rates vary widely among autoflower varieties, so don’t be discouraged if yours take a little longer than normal to sprout.

How can I tell if my autoflower seeds have germinated?

It can take a few days for autoflower seeds to germinate, but there are some things you can do to speed up the process. One easy way is to place the seeds in moist soil and cover them with soil or plastic wrap. If you’re growing indoor plants, set out a small pot of moistened soil next to your plant, and cover the autoflower seeds with half of it. You can also water them frequently; just don’t allow the soils to stay wet for too long or they will rot. Another method is to place the autoflower seeds in a warm water bath; this will help soften them so they will germinate more quickly.

The Paper Towel Method

The paper towel method is a quick and easy way to germinate autoflower seeds. Simply place the seeds on a damp paper towel and fold the towel up so that the seeds are covered. Leave the towel folded for about 12 hours, or until the seedlings have emerged.

Direct Planting

Planting Directly Into the Ground

Direct planting is a great way to get your autoflower seeds started quickly. By planting directly into the ground, you bypass the need for a soil medium and can get your plants up and growing much faster. There are a few things to keep in mind when planting direct:

Make sure the soil is moist before planting.

Make sure the seeds are covered with soil.

Make sure the plant is positioned in a sunny spot.

Water the plants regularly, especially during the early stages of growth.

Planting Into a Pot or Container

Direct planting into a pot or container is a great way to get your autoflower seeds started quickly. Simply remove the seeds from their packaging, moisten them, and place them into the pot or container. Make sure the soil is moist but not wet, and then cover the seeds with soil. Keep the pot or container in a warm, sunny spot and watch as the seeds germinate!

Planting Autoflower Seeds Indoors

If you’d like to try planting autoflower seeds indoors, there are a few different methods you can use. One is to place the autoflower seeds in moistened soil and cover them with plastic or a piece of paper towel. Place the container in a warm area and let the seeds germinate; they should be ready to transplant eight to sixteen days after being planted. Another option is to start your plants from cuttings taken from young plants; this will give you more control over how many plants you end up with, but it will take longer for the plants to reach maturity.

See also  Outdoor Marijuana Seeds

Outdoor Planting of Autoflower Seeds

Direct Planting of Autoflower Seeds:

Soak the autoflower seeds in water overnight. This will help to hydrate the seeds and increase germination rates.

When you’re ready to plant your seeds, use a tiller or a hand fork to break up the ground around them.

Water your plants regularly while they are growing; allow the soil to dry out between waterings. And be sure to fertilize them regularly with a strength appropriate for their stage of growth – early blooming auto varieties may require higher concentrations of nitrogen, while late flowering strains will benefit more from phosphorus and potassium.

Starter Cubes and Seedling Plugs

If you’re looking to get started with autoflowering cannabis seeds, it can be helpful to have some starter cubes or seedling plugs on hand. These little tools help you germinate your seeds quickly and easily, so you can get growing right away.

To use a starter cube, simply soak the cubes in water for a few hours or overnight. Then, place them in a warm place (between 70 and 80 degrees Fahrenheit is ideal) and wait until they germinate. Once they do, remove the cubes and plant them into soil.

To use a seedling plug, simply place the plug into water for a few hours or overnight. Then, place it in a warm place (between 70 and 80 degrees Fahrenheit is ideal) and wait until it germinates. Once it does, remove the plug and plant it into soil.

Overnight Soaking

Soak Your Seeds in Water Overnight

Overnight Soaking for Autoflower Seeds:

Growing autoflowering seeds can be a tricky process, but with some preparation and patience, you’ll be rewarded with healthy plants that yield thick, bountiful harvests. To start off the Growing Process successfully, it’s important to germinate your seeds in the right way and environment. One of the simplest methods for germination is soaking them overnight in water. In this guide we’ll go over 5 easy steps to help you get started with this method quickly!

Place Your Seeds in a Warm, humid Environment

If you’re looking to speed up the germination process of your autoflower seeds, soaking them overnight is a great way to do it. Simply place the seeds in a bowl or container of warm water, and let them soak for at least 12 hours or up to 24 hours. After soaking, you can either place the seeds in a warm, humid environment.

Use a Seed Germination Kit

If you’re looking to germinate your autoflower seeds quickly, then you’ll want to consider using a seed germination kit. These kits come with everything you need to get started, including instructions and fresh (or frozen) media.

Check on Your Seeds Regularly

If you’re growing autoflowering cannabis seeds, it’s important to check on them regularly to make sure they’re germinating. Overnight soaking is a great way to do this. Simply place the autoflower seeds in a bowl or container, fill it with water, and let them soak overnight. The next day, you can check to see if they’ve germinated by removing a few of the seeds and placing them in a moist paper towel. If they start to grow, the process is complete.

A Germination Station

If you’re looking to germinate your autoflower seeds quickly and easily, you’ll want to invest in a good germination station. There are a variety of options available on the market, so it’s important to find one that will fit your needs.

Some of the most popular germination stations include trays with holes in the bottom, peat pots, and soil blocks. Each has its own advantages and disadvantages, so it’s important to choose one that will work best for your seeds.

One of the most important factors to consider when choosing a germination station is the temperature. Autoflower seeds need a warm environment to germinate, so make sure the station you choose has a warm surface.

Another important factor to consider is humidity. Autoflower seeds need high levels of humidity to germinate, so make sure the station you choose has a moist environment.

Finally, make sure the station you choose has a light source. Autoflower seeds need light to germinate, so make sure the station has a light source that will reach the seeds.

In conclusion, there are many different ways to germinate autoflowering cannabis seeds. Some methods are better than others, but the most important thing is to find a method that works well for you. There is no one perfect way to germinate autoflower seeds, so experiment and see what works best for you.

How to Sprout Feminized Autoflower Cannabis Seeds

Growing your own autoflowering cannabis is easy, cost-efficient, and produces fast results. This makes growing autoflowering cannabis a great option for beginners and veteran growers alike. In this article, we discuss the first, crucial stage of growing autoflowering cannabis seeds germination and overview several easy, simple ways to sprout your autoflowering cannabis seeds. As you’ll see, germinating autoflowering cannabis requires little effort and can be achieved in just a matter of days.

Different Methods for Sprouting Autoflowering Cannabis Seeds

Another advantage of growing autoflowering cannabis is the versatility of its growing cycle. There are several different methods you can use to sprout your autoflowering cannabis seeds, all of which are equally effective.


Growers can easily germinate autoflowering cannabis with materials that are readily available in their own homes. One simple method for autoflowering cannabis seed germination is using plain water. To begin, fill a small glass with room-temperature water. If you use water from a tap, you may want to invest in a pH monitor to ensure that the pH of your water does not exceed 7.3.

Next, scoop your autoflowering seeds into a spoon – it is extremely important to handle them delicately–and gently slide them into the glass: the seeds should fall and float on the water’s surface.

Having followed these steps, you can proceed to relocate the cup into a proper environment. Place the cup of water with your seeds in a dark environment (the darker, the better) with an average temperature of 75 to 80 degrees. After completing this step, your work for the germination phase is done; simply leave your seeds undisturbed for two days, and check back to see if they’ve sprouted–if they haven’t, continue to leave them in the same environment until they sprout.

Paper Towel

The “paper towel method” is another easy way to sprout autoflowering seeds with materials that you’ll already have in your home. This method involves using a wet, folded paper towel and a plastic container to sprout your autoflowering cannabis seeds.

This method is easy and produces rapid results. To begin, you’ll need a wet paper towel and a plastic container with a lid.

Begin by cleaning and drying your plastic container to ensure a proper germination environment. Next, fold a paper towel two to three times over, then saturate it with water: though you’ll want your paper towel to be soaked all the way through, it should not be dripping water.

Next, cut two holes in the top of the lid of your container; these perforations will allow excess water to escape the container during germination.

Having done so, place your autoflowering cannabis seeds on the wet paper towel, tucking them between folds to ensure that the seeds are in direct contact with the paper towel on all sides. Proceed to place the folded paper towel with your seeds inside inside of your plastic container, and fasten the lid.

Like any other germination technique for autoflowering cannabis, the paper towel method requires a proper germination environment–and darkness is the most important factor. Store your container in the darkest possible environment. With this, your work is done: simply wait for two days to check on your seeds, which will likely have germinated–if they haven’t, continue to check the container until they sprout.

Starter Cubes

You can also germinate your autoflowering cannabis using seed starter cubes, which are easily obtainable online. Do some research to find the best starter cubes, which you will place knuckle-deep into your soil. Be sure to have your hole ready before you insert your starter cube with your autoflower seeds inside.

See also  Bulk Cannabis Seed

Make sure that your cube is moist–if it’s too dry, moisten it slightly with distilled water. Then, gently pick up one of your autoflowering cannabis seeds, and insert it into the the premade hole at the top of the starter cube. Next, insert the starter cube–with the precut hole and autoflower seed facing upwards–into a hole in your soil.

Finally, place a cup overtop of where you inserted your seed starter cube in your soil. Leave the cup in place for at least seven days after you plant your starter cube; this will help retain humidity levels during the germination process. Once your seed has sprouted, you can remove the cup and move into the next phase of the growing cycle.

Though the aforementioned methods are easy and great for beginners, some growers prefer to use soil as a natural medium. This will require specialized resources such as a pH monitor, the correct soil for growing, and a humidity monitor.

To sprout your autoflowering cannabis, begin by moistening your soil and establishing a proper growing environment with an average temperature of 77 degrees. Ensure that pH levels do not exceed 7.3 . Finally, dig a hole of the appropriate depth in the top of your soil, and bury the seed inside.

The Advantages of Autoflowers: Quick, Easy, Methods to Sprout Your Autoflowering Cannabis Seeds Germination

As you can see, sprouting autoflowering seeds is easy and produces rapid results. It is also cost efficient, as many of these methods involve materials that most people already have in their homes. Growing autoflowering cannabis is much faster and easier than growing photoperiod plants; using these easy germination methods, your autoflower seeds will sprout in no time, and with minimal effort. And the easy part doesn’t stop there–every stage of the growing process for autoflowering cannabis is rapid, productive, and easy for all growers, no matter their experience.

Germination Guide for Autoflowering Seeds

Seed germination is the first part of a successful grow cycle, to help you start your cannabis plants with the right foot, here’s an autoflower germination guide that can be used not only for cannabis but for tomatoes, mangos, strawberries. you name it!

Sebastian Good is talking about the best way to start your autoflower seed and germinates Strawberry Pie Auto.

So here’s how to germinate cannabis seeds with the best-known methods and a couple of tips that will get you harvesting in no time.

1. First Things First: Know the anatomy of your cannabis seed

The process of autoflower germination can take up to 10 days, in order to do everything correctly and know if everything’s going well, we need to know a little bit more about the seed. First of all, we need to understand the anatomy of a cannabis seed. The cannabis seed has a dark brown, hard, and often striped, shell, this shell is what protects the insides which are extremely fragile.

When germinating, we need to hydrate the seed, this will soften the seed’s shell and allow water to reach the embryo, when the water reaches it, the embryo will “activate” and start developing.

Have in mind that it’s possible to drown the seed, so we need to keep an eye on moisture levels, also making sure it doesn’t dry out. With a softened shell, it will be easier for the radicle to come out and this is when you’ll see the white taproot slowly appearing, and once it reaches 2-3cm, it’s time to plant it.

As soon as the seedling comes out of the medium, you’ll often see the shell stuck on top of the cotyledons, which are the tiny round leaves that you’re able to see once the shell has detached from the seedling. Those leaves are responsible for feeding the plant until the first set of true leaves appear. Also, there isn’t the best way to germinate marijuana seeds, you can do it any way you want, as long as you keep proper conditions, your seeds will germinate. So, if you’re wondering how do you germinate autoflowering seeds? Read along for the best methods.

2. The Best Conditions For Germinating Seeds

As you may know, cannabis plants need certain conditions depending on the stage they’re in, maintaining these conditions are the best way to ensure your plants will thrive, and when talking about seeds and germination, it’s no different.

Obviously, you can grow cannabis plants in less-than-ideal conditions and they will still grow but it may end up affecting the yields or quality of your harvest.

When talking about germinating auto seeds, germinating in less-than-ideal conditions will decrease the chances of sprouting, so unlike growing cannabis in bad conditions, which will still grow but can affect the harvest, germinating in bad conditions can end up killing your seeds. So when germinating autoflowers you should keep the temperature between 21-26°C and the humidity as close as 90% as you can.

3. Top Tricks For Germinating Old Seeds

As said above, germinating in the ideal conditions will guarantee successful germination but sometimes seeds may be old or have been kept in bad conditions and can be hard to germinate. So, to help you germinate old seeds, here are a couple of tricks that will increase the chances of germination. But first of all, you need to know the best conditions to avoid these problems.

How To Properly Store Seeds

If you are storing seeds for your next grow cycle, you need to keep them in ideal conditions. If you’re going to germinate them during the next couple of days there’s no need to do anything extra, other than keeping them in a cool place and in complete darkness but if you’re planning to store them for months or even years, you should keep them in the fridge.

You should keep your seeds in an airtight container in a fridge set at 6-8°C with a relative humidity of between 20-30%, if you can’t set your fridge to the temperatures mentioned, just keeping them in the fridge will increase the chances of germination. Just have in mind that the better the conditions, the longer your seeds with last.

Soak in supplemented water

As cannabis seeds get old, the shell hardens and can make it hard for the water to reach the embryo, and if the water doesn’t reach the embryo, your seeds won’t sprout so if you’re dealing with old seeds, you can soak them in supplemented water.

To do this, you can fill a glass cup with water and add around 30ml of hydrogen peroxide and leave your seeds soaking for 12hs, this should do the trick. You can also use germination boosters that you find in grow shops but usually, hydrogen peroxide works, also, make sure the water is around 22°C and it’s not getting direct sunlight.


Scarification is a method used to make ridges on the seed to help water pass through, to do this properly, you will need a piece of sandpaper but you can improvise and do it with a matchbox. The goal is to thin out the shell so that the water can reach the embryo easily, just make sure you don’t overdo it and end up harming the embryo inside.

Slightly Open The Seed

As you may have seen, the seed is made out of two halves and has a ridge around it, if your seeds are old, that ridge may end up hardening too much and the seed won’t sprout. So to help your weed seed germinate, you can use a knife or any other tool with a thin point to gently insert it in between the ridges and slightly separate it, after this process, you can soak your water and germinate it like you normally would.

4. Paper Towel Germination Method

The paper towel method is the easiest of all methods. You’ll need :

  • 2 paper towels
  • a plastic container or plates
  • water
Step 1

Moisten the paper towels and wring them out so they’re damp but not completely wet.

Step 2

Place the seeds on the paper towel, fold it over the seeds and place it in a plastic container, cover it with the lid to keep moisture in (can also use two plates instead of the plastic container, place the paper towel on a plate and use the other one to cover).

See also  Marijuana Seeds For Sale Columbus Ohio
Step 3

Place the container in a slightly warm and dark place. Remember to check on it daily, we must ensure the paper towels never dry out, the seeds need to keep absorbing moisture, it’s likely that the seeds will never germinate if they don’t. Sprinkle a little bit of water if needed, you’ll know they’re ready to be transplanted when the radicle is around 1-3cm long.

If the paper towel starts having a bad smell, it’s a sign of too much water, let it dry for a couple of days, and if the papers continue smelling bad, change the paper towels.

5. Soaking Overnight In A Glass Of Water

After many years of experimenting and looking for the best way to germinate our Fast Buds seeds, we must say that this is definitely one of the most effective ways.

This method is especially effective for seeds with a harder shell or older seeds. You’ll need:

Step 1

As the title says, grab a glass cup and fill it half with water.

Step 2

Place the seeds in the glass and leave it in a dark place, let the seeds soak for up to 32 hours.

Step 3

Most viable seeds will sink after a couple of hours and you should see the radicle after a couple of days. Remember that some seeds may need longer until you see the radicle coming out. If they haven’t sprouted after 72 hours, add a few drops of hydrogen peroxide to kill accumulated bacteria in the water and return to the darkness for 2 more days.

6. Using A Germination Chamber

When you get a bit more experienced, you’ll wanna look for more professional tools and the germination chamber is one of them. It consists of a plastic base with small square cells (can come with up to 256 cells, each cell supports 1 seed), on top of a heat mat, also comes with a humidity dome, basically looks like a small greenhouse. They’re very cheap and you can make one at home.

The chamber can be used with any type of medium, Rockwool cubes, peat pellets, coco fiber, perlite, or even soil and they keep the best environment for sprouting seeds and the first days of the seedling.So how to germinate a marijuana seed in a germination chamber? To start germinating, make a small hole (1-2 cm) in moisten medium, cover without applying pressure, turn on the heat mat and spray the humidity dome, it should take a couple of days to see the seedling coming out.

7. Rockwool Cubes And Peat Pellets

Rockwool cubes are small cubes made of rock and sand fibers, with the consistency of cotton candy almost, they absorb a lot of water and usually are used for germinating seeds and clones. Using them along with the germinating chamber has an advantage, being easy to transplant to the next medium or container.

Rockwool and peat pellets are an easy way to germinate seeds but can be easier to overwater your seeds.

They also can be used along with clay pellets in hydroponics. One of the bad aspects of Rockwool cubes is you can easily overwater and get root rot. Peat pellets are similar to the Rockwool cubes but are made of compressed peat moss and come in a small disc shape. To germinate in either one of them, we will use the same technique explained before, moisten the Rockwool or peat pellet, make a little hole (1-2cm) and place the seed inside, cover it gently without applying pressure and you’re all done. You can place the pellet or cube directly in any type of medium or hydroponics chamber, after sprouting, the roots will continue to grow down, even if they reach the end of the Rockwool or peat pellet.

8. Planting Directly In Medium

Sometimes the simplest way is the better way. As it happens in nature, we can also sprout our seeds in our medium of your preference (coco, soil, perlite, etc..) Just grab a pencil, or even with your fingers, make a little hole (1-2cm deep), and place the seed in it, the medium must be moist but not soaking, then cover with soil without applying pressure.

Every time you transplant a seedling, it needs some time to readjust and can cause stress, thus one of the biggest benefits of this method is you don’t have to worry about damaging your seedling when transplanting or shocking it because it already is in its final place.

9. Top Tips to Improve Seed Germination

Planting the Seeds Correctly

Cannabis seeds have an oval shape with one of the ends being sharper while the other has an indent known as the crown. When germinating cannabis seeds, it’s recommended to plant the seed with the crown pointing upwards as this is the end where the cotyledons usually come out from.

Don’t Let the Substrate Dry Out

The germination process relies on moisture to activate the biological processes that provide the energy the seedling needs to break through the seed shell and start growing. This means that the more moisture absorbed, the better. Note that the keyword here is moisture, you definitely don’t want to drown your seeds. Anyway, once the seed is in the paper towels and the germination process has begun, make sure to check regularly to ensure it’s still moist, and to help with this, it’s recommended you keep it in a warm damp place.

For better germination rates, you can opt for a heating mat and/or germination chambers, but it really doesn’t matter if you’re germination your seeds in the soil, jiffy’s, Rockwool cubes, paper towels, etc… Make sure to keep the substrate moist and you will have great results.

Planting the Seed at the Right Depth

One of the bigger issues among beginner growers is planting the seed at the right depth. These problems can get worse if you are watering the substrate after the seeds are planted. Remember, burying the seed too deep can cause it to not develop while not burying deep enough can cause the taproot to over-bend and develop a weak stem, and sometimes stunt growth.

This is why we recommend burying the seed at around 2 cm deep. You can do this by using a ruler, marking the 2 cm mark on a straw, or any other utensil that allows you to do this. Then plant your seed and cover it with the substrate without pressing too hard.

Avoid Planting several Seeds in the Same Pot

Sometimes you may not have enough substrate or pots, typically, this is when you would plant multiple seeds in the same container but they usually do not develop correctly due to several reasons. Now yes, you’re saving space and substrate but you’re definitely not helping your plants thrive as first of all, the roots need enough space to grow, and germinating in the same pot can cause the roots to fight for space.

Apart from fighting for space, if all the seedlings make it to the vegetative stage, they will continue competing for light and by doing this, you will not get the most out of each plant. Lack of light can also cause the stem and branches to grow weak which can cause problems during flower so make sure to plant one seed per pot unless you’re growing in 100-200L or bigger raised beds.

10. In Conclusion

There’s no such thing as the best way to germinate marijuana seeds, a successful germination is considered when you see the first leaves, known as Cotyledons, cannabis seeds germinate correctly with relatively high temperatures and humidity. To successfully reach the flowering stage you’ll have to use different techniques, not only for sprouting but to keep the plant happy and healthy until harvest.

Whether deciding which germination method to choose or getting ready for your first successful grow setup, our advice for beginner growers will be to start with autoflowering strains. If you look for something easy, quick, and easy to maintain, like Zkittlez Auto and Gorilla Glue Auto, there’s nothing better than choosing to grow autoflowers.

first time ever growing and got some amazing colors from this strain with low temps ran it at about 58-64 for 2 weeks and got this color

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.