Here’s how to germinate marijuana seeds the easy way with the most success and less hassle. Everything there is to know about growing marijuana seeds in rockwool cubes and where found it > Read the article! | SensorySeeds Cannabis sativa sp. is commonly known as marijuana and has been grown throughout the world for thousands of years. Cannabis seeds germinate in 3 to 7 days, though some varieties may take 10 to 15 days. While germination is a natural…
How to Germinate Marijuana Seeds the Easy Way
There are many opinions about how to germinate marijuana seeds.
Some people advocate putting cannabis seeds in between two wet paper towels.
Others say put them in a glass of water.
Such methods force you to handle your seeds when they’ve just sprouted.
The seeds have to be carefully plucked from the paper towels or water, and just as carefully placed into a growing media.
The extra handling creates opportunities for germinated seeds to be damaged.
The simplest methods that work well are always the best methods.
That’s why I germinate marijuana seeds in the media they’ll grow in.
If the final destination for my seedlings is soil, soilless mix, or coco coir, I put the appropriate material in a JiffyPot and water them from the bottom with reverse osmosis water at 6.1 pH.
You may notice it’s impossible to get accurate pH readings on zero parts per million reverse osmosis water.
I add beneficial microbes such as Voodoo Juice, Piranha, and Tarantula until I get enough parts per million to make my pH readings accurate.
The added benefit of using beneficial microbes products is they protect cannabis roots and root zones, and speed up root development.
If the final destination for my marijuana seedlings is a pure hydroponics system such as deep water culture or an ebb and flow hydro system using rockwool, I plant my seeds into a rockwool cube.
Not the smallest size ones either. I like the larger sizes.
Look here for detailed information that helps you germinate marijuana seeds using rockwool cubes.
Note that rockwool must be pre-treated before use to get its pH where you want it.
Look here for instructions on how to condition rockwool.
The best depth for planting marijuana seed is 3/8 th to ½ inch below the surface line.
The best temperature range to germinate marijuana seeds is 74-76°F, but they can germinate up to 80°F. Warmer than that is too warm.
If you don’t have precision temperature control where your seeds are germinating and temps are too cool, you could use a seedling heat mat.
Be careful to control the seed zone temperature when using a seedling heat mat.
It’s best to get a seedling heat mat with built-in thermostat.
Don’t Drown Your Cannabis Seeds
The biggest mistake growers make when they germinate marijuana seeds is overwatering.
The rockwool cube, soil, soilless mix, or coco that you germinate marijuana seeds in shouldn’t be soaking wet.
The media should be totally damp, but not soaking wet.
If the media is too wet, seeds might rot or drown.
If you have healthy seeds, they should germinate in 2-5 days.
Old or inferior seeds can take as long as 10-11 days.
If they’ve been moist that long and haven’t germinated, they’re most likely not going to.
If your seeds are old or otherwise not fresh or reliable, look at this kit that can help them germinate.
As soon as your seeds germinate, put them under a Hortilux PowerVeg lighting fixture, or some other T-5 or low-power LED, for at least 2-3 weeks until you’re sure your seedlings’ root systems and leaf structures can handle full HID, LED, or sunlight.
Rather than using the paper towel or submerse in water methods, this method we’ve given you to germinate marijuana seeds is direct, easy, and doesn’t require you to handle, transplant, and possibly damage a sprouted marijuana seed.
You might also like:
As a hydroponics marijuana grower, you need total control over how your plants absorb water, oxygen, and hydroponics nutrients. Fact is, what you choose as the environment for your cannabis…
Your marijuana plants breathe out oxygen through their leaves, while intaking oxygen from their root zone. But many cannabis growers aren’t providing enough root zone dissolved oxygen. Their plants’ roots…
Marijuana seedlings are like children. They grow faster and healthier when you nurture them through a steady and sustained program of lighting, feeding and watering. Well, they’re sorta like children.…
Where to find marijuana seeds ideal for growing in rock-wool?
Here is how rockwool is used in the cultivation of hemp
Many cannabis lovers wonder where to find ideal cannabis seeds for rock-wool cultivation: but are you sure you want to grow marijuana seeds in rockwool cubes? Before you do, there are a few things you should know.
PSYCHO XXL AUTOMIX
First of all, growing cannabis in Italy is illegal: the hemp plant produces inflorescences containing THC, the active ingredient of marijuana, which is illegal in percentages above 0.5%. For this reason, the cultivation of hemp is prohibited, even if it is no longer a criminal offence in case of small cultivation for personal use: what is legal is instead to sell and buy cannabis seeds. But what is the reason?
You should know that weed seeds do not contain THC in themselves and an inactive state is therefore considered in the same way as the common seeds of other types of plants.
The legal problem arises when they are germinated, as they would give birth to a hemp plant that would produce flowers with a high THC content.
So, if you are wondering where to buy marijuana seeds, the answer is in a grow shop, physical or online, such as SensorySeeds, and if you want to germinate them, you take a significant risk. Theoretically, the uses of marijuana seeds in Italy are as follows:
The use of stone wool as a substrate for the cultivation of hemp is a very particular technique and has, like all the others, pros and cons. Let’s see what it consists of and what are the advantages and disadvantages of growing cannabis seeds in rock-wool.
Growing cannabis seeds in rockwool: what is it and what are the advantages and disadvantages of using it
You’ve probably already heard of rock-wool but didn’t know it was also used to grow cannabis seeds and it wouldn’t be so strange if you didn’t have the slightest idea what it is. Rockwool cubes are, contrary to popular belief, an artificial product, created by man to imitate a typically Hawaiian natural phenomenon.
Pele’s hair is basaltic glass filaments born from the volcanic eruption of Kilauea, in the Hawaii islands. Due to the strong wind, the lava solidifies into a filamentous form that resembles blond hair, just like that of the god Pele. Artificially, therefore, this natural process is reproduced, solidifying basalt slag in filamentous form, using air flows, to obtain rock wool cubes.
The advantage of this type of substrate for the cultivation of cannabis seeds is linked to its humidity gradient, capable of retaining and distributing all the nutrients nebulised on it homogeneously. However, rock-wool tends to dry quickly on the surface, remaining more humid on the ground, so it should be continuously monitored.
Another great advantage of rock-wool cubes for growing marijuana seeds is that they can be placed in larger cubes as the plant grows, without disturbing its roots in any way. It will avoid having to move the cannabis seedlings from one pot to another, protecting their good health.
This type of substrate is very often used in professional hydroponic marijuana crops because of the absorbing power of its filaments. However, if it goes well in professional hydroponic systems, it presents risks in the management of home growing, which is legal in some municipalities of Spain.
The absorbing power of the filaments is a double-edged sword: if poorly handled it can lead to overloading of liquids underneath or excessive dryness since in a few hours they tend to slip away. If used outside of a hydroponic system, rockwool should be followed very carefully from this point of view, both to prevent it from staying dry for too long and not to have an overload of nutrients in the plant.
Now let’s see what the main steps are for growing ganja seeds in rock-wool.
Growing cannabis seeds in rockwool – that’s how to do it
As said before, growing weed seeds is not legal in our country, as they would lead to the production of high THC flowers. However, there have been cases where the law allows the home growing of marijuana for personal use, as it happens in some cities in Spain.
If you were to choose to grow marijuana seeds in rockwool cubes, you would first need to know how to handle this type of substrate. While it has a high absorbency power, it also has a rapid “slip” of liquids underneath, which you should keep under control to avoid nasty surprises.
First of all, you should know that rockwool has an average pH of 7, which is too alkaline to grow cannabis seeds, so it needs to be treated before using it. What you need to do is to soak the rock-wool cube in a nutrient solution with pH at 4.5 and CE (electrical conductivity) at 0.4-0.5, to stabilise the PH of the cube properly.
To be sure that you have obtained the appropriate value for growing marijuana seeds, the cube must be soaked in a nutrient solution with pH 5.5 and the PH of the runoff from the filaments measured: if it remains the same, it is ready. On the contrary, if it is still too high, it will be useful to re-immerse it in the first solution for a few hours and then redo the test until the desired PH is reached.
Once this is done, you can finally place the cannabis seed in the rockwool cube, after having previously soaked it in warm water or moistened it in the previous 24 hours using absorbent paper, all strictly in the dark. Once activated, in a few days the maria seed will hatch and the first cannabis bud will be born, which will soon open its cotyledons, the first two round leaves, and will harpoon its rootlets to the filaments of the cube.
As soon as the seed is placed in the rock-wool, it will be useful to keep it at a constant temperature of 20°-25°, which can be obtained if necessary, with a suitable lamp, lit above the cube. Maintaining humidity is very important, so unless you have created an automatic hydroponic system, you will often need to check the level of impregnation of the stone wool cube.
Once well rooted, the hemp seed can be relocated, without having to extract it from the first one, in a larger rockwool cube, previously treated as we have seen before. At this point, the hemp seedlings will be ready to be exposed to artificial light in a cultivation room.
Where to buy cannabis seeds suitable for growing in stone wool?
As you have read in this article, growing cannabis seeds in stone wool has its pros and cons. Its use is certainly more suitable for professional crops. Still, there is nothing to prevent it from being used at home, in countries where the cultivation of marijuana seeds is allowed, with adequate attention.
If you are wondering where to find marijuana seeds suitable for this type of cultivation, the answer is SensorySeeds, our online cannabis seed shop. Inside you’ll find lots of weed seeds BSF, from feminized seeds to auto flower seeds, as well as fast flowering seeds.
You’ll be spoilt for choice, and you’ll be able to receive the best cannabis seeds directly to your home in a few days and in totally anonymous packaging to preserve your privacy.
So, what are you waiting for? Click here and enter SensorySeeds, the online shop with the best cannabis seeds on the market!
How to Germinate Cannabis Seeds
This article was co-authored by Lauren Kurtz. Lauren Kurtz is a Naturalist and Horticultural Specialist. Lauren has worked for Aurora, Colorado managing the Water-Wise Garden at Aurora Municipal Center for the Water Conservation Department. She earned a BA in Environmental and Sustainability Studies from Western Michigan University in 2014.
There are 10 references cited in this article, which can be found at the bottom of the page.
This article has been viewed 65,899 times.
Cannabis sativa sp. is commonly known as marijuana and has been grown throughout the world for thousands of years. Cannabis seeds germinate in 3 to 7 days, though some varieties may take 10 to 15 days. While germination is a natural process, factors such as light, humidity/moisture, and temperature must be controlled for cannabis seeds to sprout.