How To Get Seeds From Marijuana

ILGM

Buy Cannabis Seeds Online

Breeders have begun specializing in the cultivation of cannabis seeds. Find out more about how breeders pay special attention to the pollination, harvest time, and drying process for the seeds to improve the likelihood of a successful harvest. Marijuana Cultivation/Producing Seeds Sooner or later every grower is going to want to produce marijuana seeds. Developing a new stable strain is beyond the scope of this discussion and requires It's every marijuana cultivator's dream: to produce your own cannabis seeds and have a truly home-grown harvest for your next crop.

The Importance of Collecting and Harvesting Cannabis Seeds

T here was a time in our not-too-recent history when a sack of weed almost always included seeds. However, as cannabis cultivation evolved, so did the demand for sensimilla, or high-quality, seedless cannabis. Breeders not only began developing their own customized strains, they also started specializing in the cultivation of very special cannabis seeds. These seeds are used in both the breeding process and the wide-spread distribution of the carefully created strain itself.

Related Articles

  • Autoflower Seeds Explained
  • Do Cannabis Seeds Go Bad?
  • What to Look for When Buying Cannabis Seeds
  • Ultimate Cannabis Seed Feminizer: Colloidal Silver

The Role of Seeds in the Breeding Process

The process of breeding the perfect strain requires a controlled production of seeds. Breeders must force their favorite plants to produce pollen and then use it to pollinate other favorite strains, thus creating “cross-breeds” of their two selected parents. Note that this process is not haphazard like the seeds one might find in a poorly-controlled outside marijuana grow – cannabis seed cultivation is a precise process that requires controlled, sanitary environments that are thoroughly sealed to prevent outside dander from getting in.

The plants can “veg” here, or continue their vegetative growth phase if trying to increase their size before seed production begins, but it’s not necessary. Once the plants are large enough, they are put into a flowering light cycle of 12 hours light and 12 hours of complete darkness.

Within a few weeks, the male will produce pollen sacks which will soon burst and get carried off into the air to pollinate the females. The females will now produce seeds which may continue to be used in the breeding process or harvested and sold to the public.

For the purpose of seed production, only around 20 females are recommended per male. However, a single male can realistically pollinate hundreds of females, hence the importance of a tightly sealed environment during the seed production process.

Natural Cannabis Seed Production

Cannabis is an amazingly resilient plant and doesn’t require male pollination to produce seeds. Evolution has bestowed upon the cannabis plant an amazing ability to self-pollinate when there are no males around to do it for her. Whether stressed or old (for example, a female cannabis plant that is not harvested before her prime), if a female senses an environment that is not conducive to long-term growth, she will produce seeds in hopes that her legacy will continue.

This is how feminized cannabis seeds are produced. Breeders will carefully stress a healthy female plant to “trick” her into thinking her life or safety is in danger.

One common method is to stress the female by applying solutions like colloidal silver or silver nitrate generously onto the leaves when she first enters the flower light cycle. Within 3-4 weeks, male sex organs will appear on the nodes of the female plant. Please note, applying these stress-inducing solutions to plants renders them unsmokable. The particulate cannot be washed off thoroughly because it settles deep into the surface of the plant. This method is for seed production only.

Another method is to simply let a healthy female age. If she grows past maturation, she will produce male “banana” pollen sacks without any male chromosomes. Though she may look like a hermaphroditic plant at this point (one containing the chromosomes of both male and female), the pollen she produces will contain only XX chromosomes and therefore cannot pass the Y (male) chromosome down to its heirs. Pollen collected in this way is then used to pollinate another female which will then produce female-only seeds.

How to Collect Cannabis Seeds

Though many grow ops aim to do away with seeds to grow fine sensimilla instead, sometimes breeders want seeds. Whether to grow their own crops or to sell to a demanding public, cannabis seed cultivators have their goals set on producing healthy, happy seeds in lieu of big, beautiful buds.

Seed crops are harvested when the seeds are plump and dark, often with a tiger stripe appearance (around six to eight weeks into flowering).

After harvesting, the bud is dried and the seeds are collected. Small-scale seed collection is done by simply crumbling the cannabis flower and collecting the seeds that fall out (this video by Johnnys Green Extractions offers a clever way to separate seeds from flower using an old vinyl record cover).

Commercial seed collection usually involves special machines that crush dried flower then pass the trim and seeds into separate bins. After seeds are collected, they’re stored in opaque, air-tight containers to prevent them from rotting or sprouting prematurely.

Conclusion

Though cannabis flower is usually cultivated to be seedless, sometimes the seeds are the whole point. Breeders pay special attention to the pollination, harvest time, and drying process when growing cannabis specifically for the seeds to improve the likelihood of a successful harvest.

Frequently Asked Questions

How are Feminized Seeds Made?

Feminized seeds are made by inducing a female plant to produce seeds without being pollinated by a male. These resulting seeds will not contain a male Y chromosome, only retaining the two X chromosomes from the female plant, and thus all of the resulting seeds will be female. This process can be done by stressing the plant, altering it with chemicals, or allowing it to grow past its harvesting time.

How Many Plants Can a Male Cannabis Plant Pollinate?

For professional production, it is recommended to pollinate about 20 female plants per male plant, but this is done to ensure tight oversight and quality control. In the wild, a single male plant can pollinate hundreds of female cannabis plants.

See also  Blueberry Marijuana Seeds

Can You Smoke Cannabis That Has Been Treated with Colloidal Silver?

No, colloidal silver is only used on plants raised for seeding purposes, it makes the plants that it is sprayed on unsmokable.

How are Strains Crossbred?

Cannabis breeders create crossbreeds by using the pollen of one strain to pollenate seeds with another strain. The resulting seeds will have genetics from both parents. These new plants are selected by their desirable traits and then stabilized through further breeding, typically using the genetics of their parent strains.

Have you ever harvested cannabis seeds? Share your experiences in the comments below!

Author

Abby is a writer and founder of Cannabis Content, a marketplace designed to connect cannabis writers and creatives with businesses in the industry. She has been a professional cannabis writer since 2014 and regularly contributes to publications such as PotGuide and M&F Talent. She is also the Content Director at Fortuna Hemp, America’s leading feminized hemp seed bank. Follow Abby on Facebook, Twitter, and Linkedin.

Marijuana Cultivation/Producing Seeds

Sooner or later every grower is going to want to produce marijuana seeds. Developing a new stable strain is beyond the scope of this discussion and requires the ability to grow hundreds or even thousands of breeding plants. However, just about any grower can manage to preserve some genetics by growing f2 seeds where they have crossed a male and female of the same strain, or can produce a simple cross which would be referred to as strain1xstrain2 for instance white widow crossed with ak-47 would be referred to as a WW x AK-47. You can produce some excellent seed and excellent marijuana this way.

To Feminise or not to Feminise Edit

There are numerous myths surrounding feminized seeds. Feminizing seeds are a bit more work than simply crossing two plants naturally. However it will save you a lot of time in the end. If you make fem seeds properly then there is no increased chance of hermaphrodites and all seeds will be female. This means no wasted time and effort growing males and it means that all your viable seeds produce useful plants. Since roughly half of normal seeds are male this effectively doubles the number of seeds you have.

Feminized seeds are bred to contain no male chromosomes, which will be able to produce the crop of resinous buds sought by most growers. For gardeners who require a quick and easy cultivation process, feminized seeds are the ideal choice. Some medicinal cannabis users may be deterred from growing their own supply because of the perceived difficulty of growing or of identifying the different genders and removing males early in the blooming period. Feminized seed-strains offer a simple solution to these issues, as there is no need to spend time in the first weeks of flowering checking for male plants.

Other times you will have no choice but to produce feminized seed because it will be a female plants genetics that you want to preserve and you won’t have any males. Perhaps you received these genetics via clone or didn’t keep males.

The new thing on the market for commercial Cannabis cultivation are auto-flowering feminized strains. By crossing of the cannabis ruderalis with Sativa and Indica strains many cultivators have created interesting hybrids which boast benefits from both sides of these families.

The first ‘auto-flowering cannabis seed’ which came on the market a few years ago was the Lowryder #1. This was a hybrid between a Cannabis ruderalis, a William’s Wonder and a Northern Lights #2. This strain was marketed by ‘The Joint Doctor’ and was honestly speaking not very impressive. The genetics of the ruderalis was still highly present which caused for a very low yield and little psychoactive effect. Not very attractive.

Auto-flowering cannabis and the easily distributed seed have opened a whole new market in the world of the online grow-shop, making it easy for home growers with shortage of space to grow rewarding cannabis plants in many different varieties. To grow plants indoors, a growing medium (e.g. soil or growing Potting soil, irrigation (water), fertilizer (nutrients), light and atmosphere need to be supplied to the plant.

Auto-flowers have been rising in popularity fast and there are now auto flower growers communities. These Web properties allow users to get information on how to grow these non photo-sensitive plants and what are the best practices when producing and germinating auto-flower seeds.

Selecting Suitable Parents Edit

There are a number of important characteristics when selecting parents. First are you making fem seeds? If you are then both parents will be female. This makes things easier. If not then the best you can do is select a male with characteristics in common with the females you hope to achieve from the seed.

Obviously potency, yield, and psychoactive effects are critical to the selection process. But some other important traits are size, odor, taste, resistance to mold and contaminants, early finishing and consistency.

Collecting and Storing Pollen Edit

In order to collect pollen you simply put down newspaper around the base of the plant. The pollen will fall from the plant onto the newspaper. You can then put this newspaper into a plastic bag and store it in the refrigerator or freeze it. Pollen will keep for a few months in the refrigerator and can be used on the next crop. Filtering the pollen through a silkscreen, drying, and freezing can extend viability for decades. At least one reader indicates success using pollen treated in this manner and stored at -30 c for 17 years. The chance of viability does decrease with time, even in the freezer, so the more fresh the pollen the better. Wrapping the pollen in a layer of aluminum foil and then a layer of plastic should help to protect it from freezer burn. Additionally, oxygen evacuation such as with a heavy gas like nitrogen or vacuum sealing should provide additional assurance of preservation.

Pollinating a Plant Edit

To pollinate a plant you can brush the pollen on a flower with a cotton swab or you can take the plastic bag, then wrap the flower inside it and shake, trapping the pollen inside for easier transportation. In this way you can selectively pollinate plants and even individual buds and branches.

See also  How To Tell If Cannabis Seeds Are Bad

Male Isolation Edit

A male plant or a plant with male flowers will pollinate your entire crop rendering it seedy. You probably don’t want THAT many seeds so how can you avoid it? Moving the male to another room might work but if that other room shares an air path via ducting or air conditioning then pollen may still find its way. One technique is to construct a male isolation chamber.

A male isolation chamber is simply a transparent container such as a large plastic storage tub turned on its side (available at your local megamart). Get a good sized PC fan that can be powered with pretty much any 12v wall adapter, by splicing together the + (yellow or red on fan, usually dotted on power adapter) and the – wires (black on fan, usually dotted power adapter) just twist with the like wire on the other device and then seal up the connection with electric tape. Then take a filtrate filter and cut out squares that fit the back of the pc fan so that the fan pulls (rather than pushes) air through the filter. Tape several layers of filter to the back of the pc fan so all the air goes through the filter. Now cut a large hole in the top of the plastic container and mount the pc fan over top of it so it pulls air out the box. You can use silicon sealant, latex, whatever you’ve got that gives a good tight seal.

This can be used as is, or you can cut a small intake in the bottom to improve airflow. Pollen won’t be able to escape the intake as long as the fan is moving but you might put filter paper over the intake to protect against fan failures. You can also use grommets to seal holes and run tubing into the chamber in order to water hydroponically from a reservoir outside the chamber. Otherwise you will need to remove the whole chamber to a safe location in order to water the plant or maintain a reservoir kept inside the chamber.

Making Feminized Seed Edit

To make feminized seed you must induce male flowers in a female plant. There is all sorts of information on the Internet about doing this with light stress (light interruptions during flowering) and other forms of stress. The best of the stress techniques is to simply keep the plant in the flowering stage well past ripeness and it will produce a flower (with seed).

Stress techniques will work but whatever genetic weakness caused the plants to produce a male flower under stress will be carried on to the seeds. This means the resulting seeds have a known tendency to produce hermaphrodites. Fortunately, environmental stress is not the only way to produce male flowers in a female plant.

The ideal way to produce feminized seed through hormonal alteration of the plant. By adding or inhibiting plant hormones you can cause the plant to produce male flowers. Because you did not select a plant that produces male flowers under stress there is no genetic predisposition to hermaphroditism in the seed vs plants bred between a male and female parent. There are actually a few ways to do this, the easiest I will list here.

Colloidal Silver (CS) Edit

This is the least expensive and most privacy conscious way to produce fem seed. CS has gotten a bad name because there is so much bad information spread around about its production and concentrations. It doesn’t help that there are those who believe in drinking low concentration colloidal silver for good health and there is information mixed in about how to produce that low concentration food grade product. Follow the information here and you will consistently produce effective CS and know how to apply it to get consistent results.

Simply construct a generator using a 9-12 v power supply (DC output, if it says AC then its no good) that can deliver at least 250ma (most wall wart type power supplies work, batteries are not recommended since their output varies over time). The supply will have a positive and negative lead, attach silver to each lead (contrary to Internet rumors, you aren’t drinking this so cheap 925(92.5%) Stirling silver is more than pure enough. You can expose the leads by clipping off the round plug at the end and splitting the wires, one will be positive and the other negative just like any old battery. Submerge both leads about 2-3 inches apart in a glass of distilled water (roughly 8 oz). Let this run for 8-24 hrs (until the liquid reads 12-15 ppm) and when you return the liquid will be a purple or silver hue and there may be some precipitate on the bottom.

This liquid is called colloidal silver. It is nothing more or less than fine particles of silver suspended in water so it is a completely natural solution. It is safe to handle without any special precautions. [ citation needed ] The silver inhibits female flowering hormones in cannabis and so the result is that male flowering hormone dominates and male flowers are produced.

To use the silver, spray on a plant or branch three days prior to switching the lights to 12/12 and continue spraying every three days until you see the first male flowers. Repeated applications after the first flowers appear may result in more male flowers and therefore more pollen. As the plant matures it will produce pollen that can be collected and used to pollinate any female flower (including flowers on the same plant).

Silver Thiosulfate (STS) Edit

Silver Thiosulfate is a substance that has similar principle, application and results of CS, but is more difficult to make. STS is more difficult to acquire, but it can still be obtained directly from a chemical supply company. STS is not an expensive or controlled substance.

Gibberellic Acid (GA3) Edit

This is probably the most popular way to produce feminized seed, but at the same time the least effective. GA3 is a plant hormone that also causes the plant to stretch uncontrollably. It can be purchased readily in powdered form, a quick search reveals numerous sources on e-bay for as little as $15. Simply add to water to reach 100ppm concentration and spray the plant daily for 10 days during flowering and male flowers will be produced.

See also  Weed Seeds Dc

How to Harvest Your Own Cannabis Seeds

Congratulations! You’ve mastered the art of growing your own marijuana plants from seed and clone, and you’ve succeeded in bringing in a number of fruitful harvests. Perhaps you’ve even found a couple of strains along the way whose plants produce such a scrumptious bud that you have a new goal in mind: to produce your own cannabis seeds and have a truly home-grown harvest for your next crop

Table of Contents

Woah There, Tiger

As with most forms of sexual reproduction, in order to produce marijuana offspring (or cannabis seeds), you need a male and female plant. A male plant can produce pollen, which acts as a fertilizing agent in female plants, around two weeks before a female plant is ready to receive it. Because of this difference in sexual maturity, it is important to keep your male plant alive and thriving as you wait for your female plant to reach maturation. You can do this by pruning the male’s quick-growing buds and allowing the slower-growing flowers time to mature at a more leisurely pace.

When the Moment’s Right

Once the female plant has begun to produce flowers of a decent size with a number of long hair-like pistils, she is ready to receive the male plant’s pollen. There are two ways to approach the actual pollination stage: you can stick male and female together and let nature take its course, or you can manually pollinate specific female branches.

Au Naturel

The first option is the easiest up front, but will ultimately take the most effort on the part of the grower. Essentially, when both male and female plants have reached maturation, you should place them next to each other and shake the male plant. This shaking will encourage a release of pollen, which will spread around the air and land throughout the female plant. Repeat this step once or twice a day for two days to ensure fertilization.

If the female plant is fertilized this way, there is no way to control how many cannabis seeds are produced, or where on the plant they come from. When it is time to harvest, you will notice that most, if not all, of your bud has a plethora of seeds buried within. In addition to being a lot of work, this mass production of seeds can be very wasteful. Growers may not have enough room to plant all of the seeds, and the leftover bud will be less robust due to the female plant’s energy being put into seed production.

Doing It by Hand

The second, more popular option is to pollinate specific branches on the female plant with pollen from the male. Before you get down to the dirty deed, you need to put in some prep time for both the male and female plants. First, turn off all fans and air circulation devices. For the female, prune the lower branches as well as the fan leaves that surround the branch or branches that you wish to pollinate. After preparing the female plant, clip off some of the more attractive and full-looking flowers from the male plant and place them in long paper wine bags (at least one good-sized flower per bag).

Now it’s time to pollinate. Carefully slide the paper bag with male flower around the prepared branch of the female plant. When the entire branch is covered, tightly close the end of the bag at the base of the branch using a zip-tie, string, or tape that will peel easily (such as masking tape or painter’s tape). Once the bag is secured, shake it strongly to encourage the spread of the pollen. Over the next couple of hours, repeat the shaking process one to two more times.

When removing the bag after pollination, be careful not to jostle the branch or the flower inside the bag. This could lead to accidental fertilization of other branches on your female plant (or surrounding plants). Although this requires more specific and detailed work up front, you will thank yourself later. This method of fertilization will provide you with enough seeds to plant for your next crop, while not overwhelming your female plant with seeds in every bud.

Bun’s in the Oven

Now you play the waiting game. Continue caring for and pruning your growing plants, and keep an eye on your female for the signs of fertilization. Once pollinated, most cannabis seeds will fully ripen within 4 to 6 weeks. You should expect to leave your fertilized flower on the plant longer than the bud that is not fertilized.

A ripened seed is structurally sound and dark brown or tan in color, often (but not always) with obvious stripes along the outside. The harvesting process is relatively simple. Simply dig into the fertilized flower and pull out the seeds. Don’t worry about messing up your bud harvest: female flowers that have been fertilized expend a lot more effort into growing seeds than producing THC, so the fertilized bud will not be nearly as potent to consume as the rest of the plant. (Of course, you can still use the seedless fertilized flower for shake, melting into butter, or making other edibles.)

The Circle of Life

Once you harvest your cannabis seeds, the next step is to plant them and start the entire process over again. If you’re not ready to start a new crop just yet, don’t worry. You can freeze the seeds and they will retain their ability to germinate.

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.